FARLEY LASERLAB IS PROUD TO INTRODUCE ZERO OFFSET BEVEL HEAD
Take the time out of costly secondary operations such as grinding weld preparation with Farley Laserlab’s new Zero Offset Bevel Head. This new plasma cutting bevel system is capable of cutting all bevel preparation including single, double and even triple cut bevels such as the common “K” bevel prep. Farley’s new Zero Offset head can also save material by cutting “Y” bevels without the need for a corner loop to change the torch head angle, which means parts can be nested closer together.
The head works by rotating the torch around the end of the cutting tip which means the angle of the cut can be changed without the need to offset the machine beam. This results in much simpler and faster control over the angle of the plasma. Through this new system Farley has been able to achieve excellent results such as their sharp blind bevels seen in the videos and pictures on this page.
SPECIFICATIONS
Speed - Z axis: 4meters/min | A axis: 5400 degrees/min | B axis: 5400 degrees/min
Maximum Cutting Speed - 6000 mm/min
Accuracy - Angular: ±1 degree | Linear: ± 0.2 mm | Maximum angle: ± 45 degrees
Tools Supported - HPR 260XD (HyPerformance HyDefinition Plasma) |
HPR 400XD (HyPerformance HyDefinition Plasma)
Initial Height - Farley contact sensor
Cutting Height Control - Farley AVC accurate at +/- 0.15 Volt
Protection - Torch pressure break away protection
Torch plate touch protection (Electrical protection)
Torch crash protection
Breakaway-ring protection
Arc stop detection
No cable twist
Control - Farley Laserlab PDF-TS (Touch Screen)
Programming - SigmaNEST
